Ultra Rapid Setting Latex Subfloor Levelling and Smoothing Compound – No Ammonia. ARDITEX NA® is a self-smoothing, protein free, latex levelling compound with improved flow and excellent adhesion, flexibility and moisture resistance. These unique properties ensure that ARDITEX NA® can be used with confidence over almost all subfloors without priming, including ceramic tiles, bitumen and flooring grade plywood. Resilient floor coverings can be installed after just 4 hours and ceramic tiles in as little as 3 hours.
Features:
- Install floorcoverings after 4 hours, and ceramic tiles in as little as 3 hours
- Can be used with confidence over old adhesive residues including bitumen
- Excellent adhesion without priming to almost all substrates, including flooring grade plywood, ARDEX Damp Proof Membranes and even ceramic tiles
- Unaffected by moisture, can be used under an ARDEX Damp Proof Membrane and direct to damp concrete
- Feather edge to 12mm in one application
- Apply up to 30mm incorporating ARDEX Coarse Aggregate
- Suitable for use on floors with underfloor heating
Uses:
To level uneven internal subfloors to provide a smooth surface. ARDITEX NA® can be applied on all common subfloors such as concrete and cement/sand screeds, prepared terrazzo, flooring grade asphalt, quarry tiles, internal steel floors, ARDEX Damp Proof Membranes, porcelain tiles, flooring grade plywood etc. It is ideal for use where low odour products are required.
ARDITEX NA® can also be used to encapsulate under-tile heating cables/mats onto concrete/screed/tile backing boards, prior to fixing ceramic floor tiles. ARDITEX NA® can be laid from a feather edge up to at least 12mm in a single application or up to 30mm incorporating ARDEX Coarse Aggregate. NOTE: ARDITEX NA® should not be used on top of rubber, linoleum, cork or moisture sensitive floor coverings.
Coverage:
A unit of ARDITEX NA® will cover approximately 5m² at 3mm thick. The coverage figure is based on a flat level surface, and additional material should be allowed for where the surface is rough or uneven. NOTE: The excellent flow and wet edge time of ARDITEX NA® means that, in practice, thinner applications are possible which can dramatically improve coverage.
Packaging:
ARDITEX NA® powder is packed in paper sacks incorporating a polyethylene liner – net weight 20kg. ARDITEX NA® latex is in polyethylene containers – net weight 4.95kg.
Pack size |
24.85 kg kit |
Bulk density of powder |
Approx. 1.3 kg/litre |
Initial set (Vicat) |
Approx. 1 hour |
Final set (Vicat) |
Approx. 1.5 hours |
Compressive strength – After 28 days |
Approx. 16 N/mm² |
Flexural strength – After 28 days |
Approx. 5.5 N/mm² |
Indentation resistance – 24 hours |
15 N/mm² |
Indentation resistance – 7 days |
25 N/mm² |
Typically floor coverings range between 0.5 – 6N/mm²
NOTE: 1N/mm² is the equivalent to approximately 100 Tonnes/m²
Approximate Application Thickness |
Approximate Coverage |
2mm |
7m² |
3mm |
5m² |
5mm |
3m² |
8mm* with ARDEX Aggregate |
3m² |
10mm* with ARDEX Aggregate |
2.3m² |
* For application thicknesses 8mm and above ARDEX coarse aggregate will improve coverage. See mixing instructions.
Please see our our Delivery policy page for full details of our delivery terms and conditions, including information on exclusions, geographical restrictions, third parties, and failed deliveries.
1. Delivery Timescales
We will endeavour to deliver all orders within 1-3 working days (subject to geographical restrictions). Please note, where delivery lead-times for individual orders may be subject to change, we will keep you informed directly by phone or email within 24 hours of your order being placed.
Deliveries will not be made on UK bank holidays, and in such cases will fall on the next working day.
Standard delivery hours are between 8am and 6pm, Monday to Friday. If you are not available to accept the delivery when it is attempted, then a failed delivery charge will be applied (see the Delivery page for full details)
2. Delivery Fee Structure:
All orders, excluding those containing products covered in section 3 below, will be subject to the below delivery fee structure:
- Total order weight is between 0kg and 10kg = £7.99 standard delivery fee
- Total order weight is between 10kg and 20kg = £12.99 standard delivery fee
- Total order weight is between 20kg and 75kg = £20 standard delivery fee
- Total order weight is 75kg and above = £60 large order delivery fee
- Total order value exceeds £500 (regardless of weight) = Free delivery
3. Exclusions
The delivery fees detailed above apply to all orders, excluding:
- Orders containing insulation will be charged at £60 per pallet (10 units per pallet). Please get in touch with us directly for pricing and ordering.
- Orders containing protection boards: A large order delivery fee of £60 will be applied.
- Orders containing membranes of two metres wide and above: The delivery fee will be calculated as a price per unit*.
Code |
Description |
Weight (kg) |
Delivery Fee Per Unit |
Multiple |
All membrane products with a width of two metres and above |
Varied |
£20 |
M3 |
Newton CDM 508 Mesh |
29.26 |
£25 |
M2 |
Newton CDM 508 eco Floor |
41.3 |
£30 |
M4 |
Newton CDM 520 eco Floor |
37.62 |
£40 |
*Please note that, for orders containing membranes of two metres wide and above:
- Once the total order weight exceeds 75kg then the £60 large order fee will automatically be applied
- Once the total order value exceeds £500 then the free delivery policy will automatically be applied
4. Geographical Areas
The above delivery fees apply to all postcodes in mainland England, Wales and Scotland.
For deliveries to Ireland, Northern Ireland, the Channel Islands, the Scottish Isles, and any international orders please get in touch with the BaseTec team directly by email or phone for a custom delivery price. Standard delivery timescales do not apply to these areas and will be advised on request.
Additional charges, including customs fees, duties, or taxes may apply for international orders.
Reviews
There are no reviews yet.