Adomast Adobond SFR Styrene Free Bonding Adhesive – 300ml

Adomast Adobond SFR is a high strength, chemical resistant and fast curing anchoring system for bonding either masonry to masonry or for bonding other construction components, such as metal pipework to masonry, brick or pipework. Supplied in a 300ml cartridge.

Due to the conical mixing spiral dispensing tube supplied it is easy to apply Adobond SFR in small and controlled amounts to the bonding surface.

Advantages:

• Suitable for use in concrete, brickwork and stone
• Suitable for fixing wall ties, starter bars, studs & bolts
• Suitable for close edge fixings.
• Pre-packed 10:1 ratio.
• Chemically resistant, Waterproof & vibration proof.

Application:

Unscrew the cap from the cartridge and screw on the static mixer nozzle. For the 300ml cartridge, unscrew the cap and cut the metal clip off before screwing the mixer nozzle on. Fit the cartridge into the applicator gun and gradually apply pressure to the trigger until the material exudes from the end of the nozzle. You should always waste the first 10ml or so of resin until you get an even colour.

Insert the nozzle into the hole & gun the material out removing the nozzle slowly as the hole fills up. Once sufficient resin is in the hole, release the pressure from the gun and place the stud to be fixed into the hole with a twisting action to ensure full contact between hole, resin & stud. Allow resin to cure fully before loading. Please see label on cartridge for full installation instructions