Adomast AdoGuard HD Protective Surface Treatment – 25 Litre

Adomast AdoGuard HD 25 Litre surface waterproofing and anti-graffiti treatment.

AdoGuard HD is a custom blend of speciality water-based polymers and technologies to create a combined protective surface treatment offering water, oil and soil repellence and anti-graffiti protection.

Adomast AdoGuard HD 25 Litre has been designed for use on concrete, brick , stone and other porous surfaces.

This variant is supplied as a 25 litre unit.

Advantages:

• Excellent repellence to water, oil and soiling – high roll off effect
• Graffiti Protection (2 coats recommended)
• Good Water Vapour Permeability
• Protection from – Frost Burst, Salt Weathering, Acid Rain Damage, Blooming of Salts, Algae and Moss
• Dries Completely Colourless
• Minimum Colour Change
• Excellent UV & Weathering Stability
• VOC Free
• Easy and Quick to Apply

Coverage:

3.0-5.0 m2 per litre based on average coverage, which is dependant on surface porosity and ambient temperature.

Application:

Substrates must always be clean, dust free and dry. In case of fatty stains and / or efflorescence use a suitable industrial surface cleaner such as Adoclean.

• Always test on a small portion of the substrate before applying.
• Use the product as supplied directly from the container.
• Shake the container well before use.
• Apply in regular strips, wetting the substrate surface thoroughly and evenly. Surface must be impregnated to the point of saturation especially for single coat treatments. Where applying two coats (for more porous substrates or graffiti protection) the second coat must be applied within 10 minutes of the first to maximise the performance characteristics. AdoGuard HD will begin to become water repellent within 10 minutes of application.

For large areas we recommend applying AdoGuard HD in sections, especially if applying two coats to avoid the AdoGuard HD from curing before the second coat is applied.

Over applying the product can cause drips and runs. Remove all excess before AdoGuard HD dries with a high quality decorator’s roller no more than 30 minutes after application.

Curing time: 24 hours.

Optimum effectiveness (e.g. graffiti removal) obtained after 7 days.

Clean equipment with water immediately after use.

PRECAUTIONS:

• Do not dilute or mix with another product.
• Do not apply on organic, metallic and waterproof materials.
• Do not apply during rain or frost, and when surface and air temperature is < 5°C & > 30°C