• Fast Delivery
  • Expert Support
  • Low Trade Prices
  • Quality Products
Adomast Adoseal Formwork and Surface Sealer (1)Adomast Adoseal Formwork and Surface Sealer (1)

Adomast Adoseal Formwork and Surface Sealer – 5 Litre

Brand: Adomast
Product Code: ADO-ADSL-5
In Stock

Adomast Adoseal is a low viscosity, low VOC, easy to use, high solids, single pack and moisture-cured polyurethane coating. It is designed to impart a high quality, fully impervious surface lacquer finish to formwork and other porous surfaces. This variant is supplied as a 5 litre unit.

£70.69 incl. VAT
£58.91 excl. VAT

Qty:

Adomast Adoseal 5 Litre polyurethane-based formwork face and surface sealer.

Adomast Adoseal 5 Litre is a low viscosity, low VOC, easy to use, high solids, single pack and moisture-cured polyurethane coating. It is designed to impart a high quality, fully impervious surface lacquer finish to formwork and other porous surfaces.

This tough flexible sealing coating, increases formwork life considerably. It improves concrete appearance by preventing staining from wood faced formwork. It also improves formwork release and helps cut back on formwork cleaning time. It is easily applied by spray or brush and touch dries very quickly.

This variant is supplied as a 5 litre unit.

Advantages:

  • Tough penetrating flexible sealing coat increases formwork life considerably.
  • Improves concrete appearance by eliminating moisture absorption of timber and preventing migration of wood sugars into concrete.
  • Improves formwork release, particularly where difficult features are involved.
  • Reduces formwork cleaning and maintenance time.
  • Suitable for use with all types of concrete release agents.

Coverage:

  • Low porosity surface Approx. 9.0m2 per litre
  • High porosity surface Approx. 7.0m2 per litre

Application:

Surfaces should be clean, touch-dry and previously untreated with paints, release agents or other surface deposits. Apply thinly by brush or roller two coats of Adoseal to face and edges of forms, preferably with forms horizontal to apply the second coat as soon as possible after this period so as to obtain maximum inter-coat adhesion.

If it is not possible to re-coat until the following day, the surface should first be lightly sanded. Formwork should be stacked separately in a well ventilated area and allowed to cure for a minimum of 48 hours before use during which time it should be protected from rain.

Container lids should be firmly replaced immediately after use and any unused decanted material should not be returned to container.

Clean all equipment with Resoklens immediately after use.

Specifications
Coverage Low porosity surface Approx. 9.0m2 per litre

High porosity surface Approx 7.0m2 per litre

Storage Keep containers sealed, store at room temperature and away from direct heat
Shelf life Storage stability of unopened drum is minimum 1 year
Specification ADOSEAL is manufactured by Adomast Manufacturing Ltd and shall be applied strictly in accordance with the manufacturer’s instructions. For specific advice regarding any aspect of this product, please consult our Technical Department
Health and safety Prolonged physical contact should be avoided and personal and environmental hygiene encouraged. Where contact with skin occurs, the material should be removed with soap and water. If splashes affect eyes, they should be bathed immediately with copious quantities of clear water and if discomfort persists, medical attention should be sought without delay.

See safety data sheet for further information

Please see our our Delivery policy page for full details of our delivery terms and conditions, including information on exclusions, geographical restrictions, third parties, and failed deliveries.

Delivery Timescales

We will endeavour to deliver all orders within 1-3 working days (subject to geographical restrictions). Please note, where delivery lead-times for individual orders may be subject to change, we will keep you informed directly by phone or email within 24 hours of your order being placed.

Deliveries will not be made on UK bank holidays, and in such cases will fall on the next working day.

Standard delivery hours are between 8am and 6pm, Monday to Friday. If you are not available to accept the delivery when it is attempted, then a failed delivery charge will be applied (see the Delivery page for full details).

Delivery Communications

We aim to dispatch and deliver all our products within their specified time frames. You will get notified by BaseTec via email when your products have been dispatched. This will include details of your order and the expected delivery time. BaseTec will contact you via email or phone if there are any delays in picking your order or after dispatch.

If any products are out of stock or unavailable at the time of ordering, the BaseTec team will contact you by phone or email to discuss your options.

Reviews

There are no reviews yet.

Be the first to review “Adomast Adoseal Formwork and Surface Sealer – 5 Litre”
Shopping Basket
INC VAT EX VAT