Adomast Adoshield Premium Corrosion Inhibitor – 25 Litre

Adomast Adoshield Premium 25 Litre waxy Coating that offers concrete plant and formwork protection against corrosion.

Adomast Adoshield Premium 25 Litre is a special blend of corrosion-inhibiting agents and petroleum distillates developed to be easy to use and apply, and offer maximum protection to metal surfaces where prolonged storage or shipping is envisaged.

Adoshield Premium is non-acidic and is suitable for use on all surfaces.

This variant is supplied as a 25 litre unit.

Advantages:

• Is a highly effective corrosion inhibitor for metal components for use during storage and transportation.
• Dispels water from surfaces
• Protects expensive plant and formwork from corrosion
• Saves time and money in the cleaning up operation after use
• Eases removal of subsequent concrete build-up on equipment.
• Easily applied by dipping, spray, brush or roller
• Non-acidic safe to use on all plant, metal, rubber, plastic etc

Coverage:

Dependent on the surface porosity and ambient temperatures, a typical coverage rate of between 10-12m2 per litre can be achieved.

Application:

Adoshield Premium can be used to treat new and used equipment.

Preparation: All existing contamination should be carefully removed preferably using Adoclean on hardened concrete. The equipment should then be washed off thoroughly with clean water.

Application: For best results objects may be dipped into Adoshield Premium and lightly agitated. However, where this is not practicable then Adoshield Premium should be applied as a single thin coat using a spray, brush, or roller, in a well ventilated area.

Cleaning up: Application equipment and unwanted splashes should be cleaned using Resoklens. The material is touch dry within 4 hours at 20°C.