• Fast Delivery
  • Expert Support
  • Low Trade Prices
  • Quality Products
  • Next-Day Delivery
  • Expert Support
  • Low Trade Prices
  • Quality Products
Helifix-RetroTie-1024x687Helifix-RetroTie-1024x687

Helifix RetroTie – 8mm x 270mm – Pack of 100 (Ties Only)

Brand: Helifix
Product Code: HX-RETT-8/270
In Stock

Helifix RetroTie 8mm x 270mm Remedial Wall Tie with a Dry / Resin Fix. The Helifix RetroTie is a stainless steel remedial wall tie with an inner leaf mechanical fixing and resin bonding in the outer leaf that is effective in all common building materials.

£337.91 incl. VAT
£281.59 excl. VAT

Qty:

Helifix RetroTie 8mm Remedial Wall Tie with a Dry / Resin Fix. The Helifix RetroTie is a stainless steel remedial wall tie with an inner leaf mechanical fixing and resin bonding in the outer leaf that is effective in all common building materials.ย 

System Components (to be ordered separately):ย 

  • RetroTies and plastic sleevesย 
  • Support toolย 
  • Drill bits for clearance and pilot holesย 
  • PolyPlus resin cartridge and extension nozzlesย 
  • Load test unit and collet keyย 

Installation:ย 

  1. Mark the points for the Helifix RetroTie insertion on the face of the near leaf brickwork. Drill an appropriate diameter pilot hole through the near leaf brick and to the required depth into the far leaf. The hole should be drilled about half way up the brick and around 15mm from the end to avoid frogs and core holesย 
  2. Widen the hole, through the near leaf only, to 12mm diameter. Clean the hole in both the near and far leavesย 
  3. Load the RetroTie into the support tool, insert through the near leaf and drive home into the far leaf. The โ€˜Oโ€™ ring marker allows the cavity width to be measured and avoids over-drivingย 
  4. Position the plastic sleeve over the outer end of the RetroTie and slide it down the tie with the support tool until the mark on the tool stem is flush with the outer face. The sleeve centres the tie and seals the hole adjacent to the cavityย 
  5. Security of fixing in the far leaf can be tested with a Helifix Load Test Unitย 
  6. Use the RetroTie Injection Tube to inject PolyPlus resin until the hole is filled and then make goodย 

Applications:ย 

  • Versatile replacement wall tieย 
  • Use where there is hard external brick materialย 
  • Use where random testing is required of the security of fixing in the inner leaf

Features:ย 

  • One-piece grade 304 or 316 stainless steel tieย 
  • Quick and easy installationย 
  • Effective in all common building materialsย 
  • Far leaf security of fixing easily proof testedย 
  • Mechanical fixing, without expansion, in the far leaf

Benefits:ย 

  • Highly economical and effectiveย 
  • Minimal inconvenience to occupantsย 
  • Leaves building virtually unmarkedย 
  • No splitting of bricks or blocksย 
  • Multiple drip points prevent transfer of water across cavity
Technical Specifications
Material Austenitic stainless steel Grade 304 (1.4301) or 316 (1.4401)
Diameter 8mm
Length to be used ยพ of near leaf thickness + cavity width + far leaf penetration depending on material, typically 70mm
Length 270mm
Depth of pilot hole Near leaf thickness + cavity width + far leaf penetration + 10mm
Minimum fixing density Ties should be at 900mm centres horizontally by 450mm vertically, in a staggered pattern, or as specified
Bonding agent (near leaf only) PolyPlus Resin (or HeliBond if required)
Near leaf material Far leaf material Near leaf pilot/clearance hole Far leaf pilot/clearance hole Penetration into far leaf Pull out
Clay brick Aircrete 12mm None 75-90mm 1.0kN
Clay brick Timber stud 12mm (10mm if 6mm tie) None 55mm 1.0kN
Clay brick Clay brick 12mm 5-6mm 70mm 2.0kN
Clay brick Concrete block 12mm 6mm 70mm 2.0kN
Clay brick Concrete 12mm 6-6.5mm 35mm 2.0kN

NOTE: All figures quoted are indicative dependent on the exact nature of the substrate. Testing should always be undertaken on site using the Helifix Load Test Unit. Compression Resistance should be checked with the Helifix Technical Department. Fixing Density should be calculated by the Helifix Technical Department.

Recommended Tooling
For drilling pilot hole Rotary percussion 3-jaw-chuck drill
For drilling clearance hole SDS hammer drill or rotary percussion drill
For installing RetroTie Power driver or hand held Support Tool

Please see our our Delivery policy page for full details of our delivery terms and conditions, including information on exclusions, geographical restrictions, third parties, and failed deliveries.

1. Delivery Timescales

We will endeavour to deliver all orders within 1-3 working days (subject to geographical restrictions). Please note, where delivery lead-times for individual orders may be subject to change, we will keep you informed directly by phone or email within 24 hours of your order being placed.

Deliveries will not be made on UK bank holidays, and in such cases will fall on the next working day.

Standard delivery hours are between 8am and 6pm, Monday to Friday. If you are not available to accept the delivery when it is attempted, then a failed delivery charge will be applied (see the Delivery page for full details)

2. Delivery Fee Structure:

All orders, excluding those containing products covered in section 3 below, will be subject to the below delivery fee structure:

  1. Total order weight is between 0kg and 10kg = ยฃ7.99 standard delivery fee
  2. Total order weight is between 10kg and 20kg = ยฃ12.99 standard delivery fee
  3. Total order weight is between 20kg and 75kg = ยฃ20 standard delivery fee
  4. Total order weight is 75kg and above = ยฃ60 large order delivery fee
  5. Total order value exceeds ยฃ500 (regardless of weight) = Free delivery

3. Exclusions

The delivery fees detailed above apply to all orders, excluding:

  1. Orders containing insulation will be charged at ยฃ60 per pallet (10 units per pallet). Please get in touch with us directly for pricing and ordering.
  2. Orders containing protection boards: A large order delivery fee of ยฃ60 will be applied.
  3. Orders containing membranes of two metres wide and above: The delivery fee will be calculated as a price per unit*.
Code Description Weight (kg) Delivery Fee Per Unit
Multiple All membrane products with a width of two metres and above Varied ยฃ20
M3 Newton CDM 508 Mesh 29.26 ยฃ25
M2 Newton CDM 508 eco Floor 41.3 ยฃ30
M4 Newton CDM 520 eco Floor 37.62 ยฃ40

*Please note that, for orders containing membranes of two metres wide and above:

  1. Once the total order weight exceeds 75kg then the ยฃ60 large order fee will automatically be applied
  2. Once the total order value exceeds ยฃ500 then the free delivery policy will automatically be applied

4. Geographical Areas

The above delivery fees apply to all postcodes in mainland England, Wales and Scotland.

For deliveries to Ireland, Northern Ireland, the Channel Islands, the Scottish Isles, and any international orders please get in touch with the BaseTec team directly by email or phone for a custom delivery price. Standard delivery timescales do not apply to these areas and will be advised on request.

Additional charges, including customs fees, duties, or taxes may apply for international orders.

Reviews

There are no reviews yet.

Be the first to review “Helifix RetroTie – 8mm x 270mm – Pack of 100 (Ties Only)”

You may also like…

Shopping Basket
INC VAT EX VAT