Adomast Adocure Sealer PF Concrete Curing and Sealing – 5 Litre

Adomast Adocure Sealer PF 5 Litre is a clear acrylic polymer resin solution primarily for application to surfaces of freshly laid concrete where it has a double function, firstly to form an effective curing membrane and secondly to act as an in-depth sealer for the hardened concrete, rendering its surface dustproof and hard wearing.

This variant is supplied as a 5 litre unit.

Adomast Adocure Sealer PF 5 Litre was specifically developed for aiding curing and sealing of power-floated concrete surfaces – it is also suitable for application to existing concrete surfaces to help control dusting.

Advantages:

• Cures and seals in one operation saving time and labour
• Effective in sealing existing and more impermeable surfaces
• Significantly improves curing efficiency
• Provides abrasion resistant hard-wearing easy-clean surface
• Effective anti-carbonation coating
• Effecive in sealing power floated surfaces

Application:

New concrete: Apply by fan-jet sprayer to achieve a coverage of between 4-6m2 per litre immediately after final finishing and power-floating when surface water is no longer evident.

Existing concrete: Apply by sprayer as above to surfaces that should be clean, sounds and free of laitance oil, paint or any other contaminants. A dry surface is preferable as it permits easier penetration but a damp surface is acceptable providing there is no standing water. On very porous surfaces that will be evident by rapid absorption of the material, an additional coat will be required after the first has become touch-dry.

Touch dry time: 2 to 4 hours dependent upon temperature and wind.

Hard dry time: 18 to 24 hours dependent upon temperature and wind.

Flash point: 40 degrees Centigrade.

Coverage:

Apply the selected grade by spray at a rate of approximately 4-6,2 per litre, taking care to ensure complete coverage. Immediately after use the spraying equipment should be thoroughly washed with Resoklens.