Adomast Adocure Standard 75% Efficiency Concrete Curing Agent – 5 Litre

Adomast Adocure Standard 5 Litre is a spray-applied liquid concrete curing membrane applied to the surface of freshly cast concrete.

Adomast Adocure Standard 5 Litre is designed to physically retain the moisture within freshly cast concrete allowing full hydration of the cement thus allowing the concrete to fully “cure”. It does this by covering the surface of the concrete with a resin film which prevents moisture from leaving the surface.

This variant is supplied as a 5 litre unit.

Advantages:

Prevents premature drying out of the concrete surface, thus:

Reducing the risks of surface cracking and
Reducing the risk of surface dusting
Improves the durability of the concrete surface
Will enable the concrete to attain improved physical properties
75% curing efficiency
Easy to use, spray application

Coverage:

Apply the selected grade by spray at a rate of approximately 4-6 m2 per litre, taking care to ensure complete coverage. Immediately after use the spraying equipment should be thoroughly washed out with Resoklens.

Application:

Freshly cast surfaces: Apply progressively as soon as final tamping or trowelling has been completed. Avoid delays particularly on warm windy days when water will evaporate quickly from the surface before the curing agent has been applied.

Surfaces struck from shuttering: On surfaces struck from shuttering the concrete is “hungry” for water, flood coat with water as soon as the formwork is struck, as soon as this water has run off, apply the desired grade of Adocure Standard. If this is not done it is probable that the curing compound will be absorbed below the concrete surface leaving the concrete surface unprotected. This advice regarding the flood coating of concrete surfaces protected by formwork is applicable whatever curing agent you may be using.

Curing agents are designed to lock moisture into concrete; they can only achieve this by being on the surface of the concrete