Adomast SafeFloor & Wall Seal High Performance, Water Based Concrete Sealer.
SafeFloor & Wall Seal is a water based and non-toxic blend of high performance Polyurethane and Acrylic coatings which form a highly durable and protective film on concrete surfaces.
SafeFloor & Wall Seal once applied increases the surface abrasion resistance, provides excellent dust proofing resistance, protects against the effects of weathering and is suitable for both interior and exterior applications.
This variant is supplied as a 5 litre unit.
Advantages
- Penetrates and seals concrete surfaces to protect against the effects of weathering.
- Dries to a clear transparent film that resists yellowing under exterior or ultraviolet exposure.
- Gives an alternative to solvent based materials where fumes may be objectionable, undesirable, or non-compliant.
- Suitable for use on renders and block work
- Reduces or eliminates efflorescence
Coverage:
Sealing and Dustproofing Concrete: First Coat 3-5 m2/litre Optional Second coat: 5-7 m2/litre. *Coverage rates assume dense bricks, and will vary from the above rates depending on surface porosity and texture.
AVOID EXCESSIVE BUILD-UP. THICKER APPLICATIONS MAY LEAD TO DISCOLOURATION AND IMPROPER SEALER PERFORMANCE
Application:
Surface Preparation: The surface should be clean and free of mould, mildews or other plant growth. Remove any other materials that may prevent adhesion of the SafeFloor & Wall Seal. Avoid spraying onto windows, doors or surrounds by masking where necessary. Surfaces need not be dry but excessive dampness will reduce penetration.
Mixing: SafeFloor & Wall Seal should be used directly from the container.
Application: Apply at a uniform coverage by spray, brush or roller. SafeFloor & Wall Seal may be sprayed with a hand held “pump-up” sprayer or with an airless industrial sprayer. If roller applied, use a short 8-10mm nap sleeve.
Sealing: Generally a second coat will be required, apply within 24 hours.
Cleaning: Immediately after spraying, clean line and nozzle thoroughly with water. Brushes and rollers can also be cleaned with water.
Limitations: Do not use in rain or if rain is expected in next 4 hours. Do not use in freezing temperatures. Suitable for most general applications but should not be used where persistent moisture is present. Where bricks have softened or pointing is friable, repairs should be carried out before application of SafeFloor & Wall Seal.
| Specifications |
| Drying Time* at 20°C, 60% RH |
1-2 hours |
| Recoat Time** |
3-4 hours but <24 hrs |
| VOC Content |
30g/l |
| Coverage |
Sealing and Dustproofing Concrete: First Coat 3-5 m2/litre Optional Second coat: 5-7 m2/litre. *Coverage rates assume dense bricks, and will vary from the above rates depending on surface porosity and texture.
AVOID EXCESSIVE BUILD-UP. THICKER APPLICATIONS MAY LEAD TO DISCOLOURATION AND IMPROPER SEALER PERFORMANCE |
| Storage |
Keep containers sealed. Store in dry conditions at room temperature and away from direct heat. Protect from frost. When stored correctly in unopened container storage stability is 1 years. Stir or mix thoroughly if stored for more than 21 days. |
| Shelf life |
1 years when stored as per the instructions above |
| Specification |
SAFEFLOOR & WALLSEAL is manufactured by Adomast Manufacturing Ltd and shall be applied strictly in accordance with the manufacturer’s instructions. For specific advice regarding any aspect of this product, please consult our Technical Department |
| Health and safety |
Avoid physical contact with material and inhalation. If contact with skin should occur wash with a suitable antiseptic cleaner and then soap and water. If splashes should affect eyes, bathe immediately with clean water and if discomfort persists seek medical advice.
See Safety Data Sheet for further information. |
**Where a second coat is to be applied, application must be within 24 hours to ensure proper inter-coat adhesion
Please see our our Delivery policy page for full details of our delivery terms and conditions, including information on exclusions, geographical restrictions, third parties, and failed deliveries.
Delivery Timescales
We will endeavour to deliver all orders within 1-3 working days (subject to geographical restrictions). Please note, where delivery lead-times for individual orders may be subject to change, we will keep you informed directly by phone or email within 24 hours of your order being placed.
Deliveries will not be made on UK bank holidays, and in such cases will fall on the next working day.
Standard delivery hours are between 8am and 6pm, Monday to Friday. If you are not available to accept the delivery when it is attempted, then a failed delivery charge will be applied (see the Delivery page for full details).
Delivery Communications
We aim to dispatch and deliver all our products within their specified time frames. You will get notified by BaseTec via email when your products have been dispatched. This will include details of your order and the expected delivery time. BaseTec will contact you via email or phone if there are any delays in picking your order or after dispatch.
If any products are out of stock or unavailable at the time of ordering, the BaseTec team will contact you by phone or email to discuss your options.
Fast Delivery 
Expert Support
Low Trade Prices
Quality Products
In Stock
Reviews
There are no reviews yet.