Newton High Water Level Alarm – 12 VDC Mains Powered Alarm With Battery Backup

The Newton High Water Level Alarm (PA50-12) is designed to detect elevated water levels within sump chambers used for groundwater or surface water pumping applications.

It should be used as standard with the Titan pumping systems:

• Newton Titan Compact Chamber with 2 x TAS250 Automatic Pumps and Internal Pipework
• Newton Titan Compact Chamber with 1 x TAS250 Automatic Pump and Internal Pipework

The unit is powered via a 12 VDC mains adapter (3-pin). In addition, a 9 VDC battery ensures continued alarm operation during mains power failure in systems without a battery backup.

The alarm can be configured for either automatic or manual reset following an alarm event. A front-facing mute button allows the audible alarm to be silenced, once the alarm condition has been acknowledged. A flashing visual indicator remains active to signal an alarm condition, even when the sounder is muted.

For single pump systems, the alarm float switch should be positioned just above the activation point of the pump. In twin pump systems, the switch should be installed above the activation point of the primary pump but below the activation point of the secondary pump.

Key Benefits:

• Dual 12 VDC power options – powered from wall mounted power supply or directly from the large DC battery of the Victron Battery Backup System
• 9 VDC battery ensures alarm functionality during power outages
• Loud 90 dB sounder with visual indicator
• Auto or Manual reset options
• 10m float cable
• Mute and test buttons for user control
• Surface mounting or flush mounting to standard electric back box
• Zero volt relay outputs allows integration with Pulse or Bridge Monitoring Systems or BMS (Building Management System) of an alarm occurrence

Continued Operation During Power Outages:

When the PA50-12/M is powered by grid mains, at power outage the alarm will switch power supply to the 9V battery within the alarm enclosure.

Warranty:

The alarm is supplied with a one-year back-to-base warranty which is dated from either the date of purchase or a proven date of installation. If the unit develops a fault during the warranty period, Newton Waterproofing Systems will repair or replace the unit under warranty. Post the unit to the address below, together with an explanation of the problem and a return address. The warranty will be invalidated if the unit is damaged because of improper handling, storage, or installation and in such cases a repair charge may be applicable.