Adomast Adobond SFR 300ml is a high strength, chemical resistant and fast curing anchoring system for bonding either masonry to masonry or for bonding other construction components, such as metal pipework to masonry, brick or pipework. Supplied in a 300ml cartridge.
Due to the conical mixing spiral dispensing tube supplied, it is easy to apply Adomast Adobond SFR 300ml in small and controlled amounts to the bonding surface.
Advantages:
- Suitable for use in concrete, brickwork and stone
- Suitable for fixing wall ties, starter bars, studs & bolts
- Suitable for close edge fixings.
- Pre-packed 10:1 ratio.
- Chemically resistant, Waterproof & vibration proof.
Application:
Unscrew the cap from the cartridge and screw on the static mixer nozzle. For the 300ml cartridge, unscrew the cap and cut the metal clip off before screwing the mixer nozzle on. Fit the cartridge into the applicator gun and gradually apply pressure to the trigger until the material exudes from the end of the nozzle. You should always waste the first 10ml or so of resin until you get an even colour.
Insert the nozzle into the hole & gun the material out removing the nozzle slowly as the hole fills up. Once sufficient resin is in the hole, release the pressure from the gun and place the stud to be fixed into the hole with a twisting action to ensure full contact between hole, resin & stud. Allow resin to cure fully before loading. Please see label on cartridge for full installation instructions
Performance data at standard embedment depth in 25n/mm2 concrete using grade 8.8 steel
| Stud Size |
Hole Size |
Hole Depth |
Characteristic Load (kn) |
Recommended Load (kn) |
Edge Distance (mm) |
Spacing (mm) |
Min concrete depth (mm) |
| M8 |
10 |
80 |
26.1 |
8.7 |
120 |
80 |
110 |
| M10 |
12 |
90 |
32.1 |
10.7 |
135 |
90 |
120 |
| M12 |
14 |
110 |
43.8 |
14.6 |
165 |
110 |
140 |
| M16 |
18 |
125 |
51 |
17 |
190 |
125 |
170 |
| M20 |
22 |
170 |
87 |
29 |
255 |
170 |
230 |
Please see our our Delivery policy page for full details of our delivery terms and conditions, including information on exclusions, geographical restrictions, third parties, and failed deliveries.
Delivery Timescales
We will endeavour to deliver all orders within 1-3 working days (subject to geographical restrictions). Please note, where delivery lead-times for individual orders may be subject to change, we will keep you informed directly by phone or email within 24 hours of your order being placed.
Deliveries will not be made on UK bank holidays, and in such cases will fall on the next working day.
Standard delivery hours are between 8am and 6pm, Monday to Friday. If you are not available to accept the delivery when it is attempted, then a failed delivery charge will be applied (see the Delivery page for full details).
Delivery Communications
We aim to dispatch and deliver all our products within their specified time frames. You will get notified by BaseTec via email when your products have been dispatched. This will include details of your order and the expected delivery time. BaseTec will contact you via email or phone if there are any delays in picking your order or after dispatch.
If any products are out of stock or unavailable at the time of ordering, the BaseTec team will contact you by phone or email to discuss your options.
Fast Delivery 
Expert Support
Low Trade Prices
Quality Products
In Stock
Reviews
There are no reviews yet.