• Fast Delivery
  • Expert Support
  • Low Trade Prices
  • Quality Products
Placeholder

Adomast Adoflow Extra Superplasticiser for Concrete – 5 Litre

Brand: Adomast
Product Code: ADO-EXT-5
In Stock

Adomast Adoflow Extra is a liquid plasticiser and water reducing agent that imparts extremely high workability when added to a concrete mix. It also enables the concrete to achieve high compaction with minimal or no tamping and its increased flow assists with difficult pours. This variant is supplied as a 5 litre unit.

£19.62 incl. VAT
£16.35 excl. VAT

Qty:

Adomast Adoflow Extra 5 Litre is a liquid plasticiser and water reducing agent that imparts extremely high workability when added to a concrete mix.

Being a highly effective deflocculating agent. it disperses cement paste into its primary particles, significantly increasing the flow characteristics of the paste.

This permits significant reduction in water content of normal workability concrete producing higher early and ultimate strengths.

Adomast Adoflow Extra 5 Litre also enables the concrete to achieve high compaction with minimal or no tamping and its increased flow assists with difficult pours.

This variant is supplied as a 5 litre unit.

Advantages:

  • Enables concrete to achieve high compaction with minimal or no vibration or tamping.
  • Increases flow characteristics of concrete to assist with difficult pours.
  • Permits significant reduction in water content of normal workability concrete with consequent reduction in water/cement ratio to produce higher early and ultimate strengths.

Yield:

1 Litre of Adoflow Extra per 100Kg of Portland Cement is a recommended starting point. Trials should be carried out to optimise the dosage for each concrete formulation.

Application:

The optimum addition rate of ADOFLOW EXTRA is best determined after preliminary trials with the actual concrete under consideration. As a guide for carrying out trials an addition rate of 0.5 litres to 1.5 litres per 100 kilos of Portland cement is recommended. Where high early and ultimate strength concrete is required, necessitating a steep reduction in water/cement ratio, the addition rate of ADOFLOW EXTRA may be increased up to 2.0 litres per 100 kilos Portland cement.

Mixing: ADOFLOW EXTRA is best added during the mixing cycle preferably at the same time as the water. Alternatively it may be added to a normal concrete mix just prior to the pour allowing for a further mixing cycle of at least 2 minutes

Typical Comparisons: The following data is typical of what can be expected when comparing a concrete mix with the inclusion of ADOFLOW EXTRA to a control mix.

High Workability Self Compacting Concrete:

  • Aggregate/Cement Ratio 5.2:1
  • W/C Ratio – Control Mix 0.58
  • W/C Ratio – Test Mix 0.58

ADOFLOW EXTRA – Test Mix 1.0 litre per 100 kg OPC:

  • Slump – Control Mix 50mm
  • Slump – Test Mix Collapse

Compressive Strength – Test Mix:

  • 7 days: 102% of control
  • 28 days: 103% of control

High Early & Ultimate Strength Concrete:

  • Aggregate/Cement Ratio 5.2:1
  • W/C Ratio – Control Mix 0.58
  • W/C Ratio – Test Mix 0.47

ADOFLOW EXTRA -Test Mix 1.25 litre per 100 kg OPC:

  • Slump – Control Mix 50mm
  • Slump – Test Mix 150mm

Compressive Strength – Test Mix:

  • 1 day: 180% of control
  • 7 days: 144% of control
  • 28 days: 135% of control
Specifications
Yield 1 litre of ADOFLOW EXTRA per 100kg of Portland Cement is a recommended starting point. Trials should be carried out to optimise the dosage for each concrete formulation
Storage Store at temperatures above freezing but not above 28 degrees C in dry condition and under cover. Should freezing occur completely thaw material and then mix thoroughly before mix
Shelf life if stored in accordance to the above, in these circumstances shelf life is indefinite
Mixing ADOFLOR EXTRA is best added during the mixing cycle preferably at the same time as the water. Alternatively it may be added to a normal concrete mix just prior to the pour allowing for a further mixing cycle of at least 2 minutes

Please see our our Delivery policy page for full details of our delivery terms and conditions, including information on exclusions, geographical restrictions, third parties, and failed deliveries.

Delivery Timescales

We will endeavour to deliver all orders within 1-3 working days (subject to geographical restrictions). Please note, where delivery lead-times for individual orders may be subject to change, we will keep you informed directly by phone or email within 24 hours of your order being placed.

Deliveries will not be made on UK bank holidays, and in such cases will fall on the next working day.

Standard delivery hours are between 8am and 6pm, Monday to Friday. If you are not available to accept the delivery when it is attempted, then a failed delivery charge will be applied (see the Delivery page for full details).

Delivery Communications

We aim to dispatch and deliver all our products within their specified time frames. You will get notified by BaseTec via email when your products have been dispatched. This will include details of your order and the expected delivery time. BaseTec will contact you via email or phone if there are any delays in picking your order or after dispatch.

If any products are out of stock or unavailable at the time of ordering, the BaseTec team will contact you by phone or email to discuss your options.

Reviews

There are no reviews yet.

Be the first to review “Adomast Adoflow Extra Superplasticiser for Concrete – 5 Litre”
Shopping Basket
INC VAT EX VAT