Ardex Feather Finish Rapid Drying Patching and Smoothing Compound – 11kg Grey

ARDEX FEATHER FINISH is an ultra rapid drying patching and smoothing compound, which provides a high bond strength to concrete, plywood, sand/cement screeds, existing smoothing compounds and ceramic tiles, without the need to prime.

Features:

• Floorcoverings can be installed after as little as 15 minutes
• True feather edge allows for greater coverage – up to 50m² coverage per 11kg bag
• Ideal for patching and smoothing minor surface damage to levelling and smoothing compounds
  Exceptional bond to plywood, concrete, smoothing compounds, terrazzo and ceramic tiles, without the need to prime
• Easy to mix and apply, just add water

Uses:

Designed for use in commercial and domestic locations, prior to the installation of resilient floorcoverings such as luxury vinyl tiles or sheet vinyl etc. 

ARDEX FEATHER FINISH is ideal for the rapid skimming of plywood, patching, filling and feather finishing daywork joints, ridges, gouges, depressions, and uneven trowel marks in the sub-floor, as well as smoothing joints between staggered plywood sheets.

Coverage:

An 11kg bag of ARDEX FEATHER FINISH, when used to smooth a plywood sub-floor, will give up to approximately 50m² of coverage when a skim coat is applied. Thicker applications will reduce coverage, e.g. 10m² at a 1mm thickness.

A 5kg bag will cover 4.5m² at 1mm thick, or approximately 22.5m² as a scratch coat.

Packaging:

ARDEX FEATHER FINISH is packed in paper sacks incorporating a polyethylene liner – net weight 11kg or 5kg.