• Fast Delivery
  • Expert Support
  • Low Trade Prices
  • Quality Products
  • Next-Day Delivery
  • Expert Support
  • Low Trade Prices
  • Quality Products
DCP Cemfair PF Fairing Coat Mortar - 20kgDCP Cemfair PF Fairing Coat Mortar - 20kg

DCP Cemfair PF Fairing Coat Mortar – 20kg

Brand: DCP
Product Code: FG-CR-01000010
In Stock

Cemfair PF is a one component acrylic polymer modified powder. When mixed with water, Cemfair PF produces a highly consistent, smooth, trowellable, shrinkage compensated fairing coat mortar.

£40.32 incl. VAT
£33.60 excl. VAT

Qty:

One component polymer modified shrinkage compensated cementitious fairing coat repair mortar. Cemfair PF is a one component acrylic polymer modified powder. When mixed with water, Cemfair PF produces a highly consistent, smooth, trowellable, shrinkage compensated fairing coat mortar.ย 

Cemfair PF is suitable for application in the range of feather edge up to 3 mm, it also can be used to infill honeycombing and voids up to 5 mm deep for vertical and overhead applications.ย 

Applications:ย 

  • Filling of minor cracksย 
  • Fair-facedย 
  • Thin layer renderย 
  • Skim coat for pin holes and minor honeycomb repairsย 
  • Concrete repairย 
  • Pore sealer and leveling mortarย 
  • To produce a uniform surface for subsequent paintfinishes and coatings

Advantages:ย 

  • Easy to apply. Single component, requires only addition of water.ย 
  • Shrinkage compensated fairing coat mortar.ย 
  • Excellent adhesion to concrete, no independent primer or curing is required.ย 
  • Compatible with most types of protective coatings.ย 
  • Suitable for internal and external applications.ย 
  • Cost effective, hand applied, no formwork is required.ย 
  • Non-toxic.

Standards:ย 

Cemfair PF complies with the requirements of BS EN 1504-3 Class R2 for repair principles 3.1.ย 

Yield:ย 

Approximately 13.9 โ€“ 14.2 liter per 20 kg bag.ย 

Storage:ย 

Cemfair PF has a shelf life of 12 months from the date of manufacture if stored at temperatures between 2ยฐC and 50ยฐC in original unopened bags. If these conditions are exceeded, DCP Technical Department should be contacted for advice.

Technical Properties. W/P = 0.3:
Colour Grey
Pack size 20kg
Fresh wet density 1.85 ยฑ 0.10 g/cmยณ
Pot life 60 – 90 min.
Flexural strength: BS 6319-3 โ‰ฅ 7 N/mmยฒ
Minimum application temperature 5ยฐC
Application thickness 0 – 3 mm

 

Performance Characteristics EN 1504-3 Requirement for Class R2 Measured Value
Compressive strength: BS EN 12190 โ‰ฅ 15 N/mmยฒ @ 28 days โ‰ฅ 25 N/mmยฒ @ 28 days
Adhesion bond: BS EN 1542 โ‰ฅ 0.8 N/mmยฒ โ‰ฅ 1.0 N/mmยฒ
Choride ion content: BS EN 1015-17 โ‰ค 0.05% โ‰ค 0.03%
Thermal compatibility: freeze-thaw cycling BS EN 13687-1 โ‰ฅ 0.8 N/mmยฒ โ‰ฅ 0.8 N/mmยฒ

Please see our our Delivery policy page for full details of our delivery terms and conditions, including information on exclusions, geographical restrictions, third parties, and failed deliveries.

1. Delivery Timescales

We will endeavour to deliver all orders within 1-3 working days (subject to geographical restrictions). Please note, where delivery lead-times for individual orders may be subject to change, we will keep you informed directly by phone or email within 24 hours of your order being placed.

Deliveries will not be made on UK bank holidays, and in such cases will fall on the next working day.

Standard delivery hours are between 8am and 6pm, Monday to Friday. If you are not available to accept the delivery when it is attempted, then a failed delivery charge will be applied (see the Delivery page for full details)

2. Delivery Fee Structure:

All orders, excluding those containing products covered in section 3 below, will be subject to the below delivery fee structure:

  1. Total order weight is between 0kg and 10kg = ยฃ7.99 standard delivery fee
  2. Total order weight is between 10kg and 20kg = ยฃ12.99 standard delivery fee
  3. Total order weight is between 20kg and 75kg = ยฃ20 standard delivery fee
  4. Total order weight is 75kg and above = ยฃ60 large order delivery fee
  5. Total order value exceeds ยฃ500 (regardless of weight) = Free delivery

3. Exclusions

The delivery fees detailed above apply to all orders, excluding:

  1. Orders containing insulation will be charged at ยฃ60 per pallet (10 units per pallet). Please get in touch with us directly for pricing and ordering.
  2. Orders containing protection boards: A large order delivery fee of ยฃ60 will be applied.
  3. Orders containing membranes of two metres wide and above: The delivery fee will be calculated as a price per unit*.
Code Description Weight (kg) Delivery Fee Per Unit
Multiple All membrane products with a width of two metres and above Varied ยฃ20
M3 Newton CDM 508 Mesh 29.26 ยฃ25
M2 Newton CDM 508 eco Floor 41.3 ยฃ30
M4 Newton CDM 520 eco Floor 37.62 ยฃ40

*Please note that, for orders containing membranes of two metres wide and above:

  1. Once the total order weight exceeds 75kg then the ยฃ60 large order fee will automatically be applied
  2. Once the total order value exceeds ยฃ500 then the free delivery policy will automatically be applied

4. Geographical Areas

The above delivery fees apply to all postcodes in mainland England, Wales and Scotland.

For deliveries to Ireland, Northern Ireland, the Channel Islands, the Scottish Isles, and any international orders please get in touch with the BaseTec team directly by email or phone for a custom delivery price. Standard delivery timescales do not apply to these areas and will be advised on request.

Additional charges, including customs fees, duties, or taxes may apply for international orders.

Reviews

There are no reviews yet.

Be the first to review “DCP Cemfair PF Fairing Coat Mortar – 20kg”

You may also like…

Shopping Basket
INC VAT EX VAT