• Fast Delivery
  • Expert Support
  • Low Trade Prices
  • Quality Products
  • Next-Day Delivery
  • Expert Support
  • Low Trade Prices
  • Quality Products
Newton HydroBond 109-LM Rubber Waterproofing Membrane - 20 Litre TubNewton HydroBond 109-LM Rubber Waterproofing Membrane - 20 Litre Tub

Newton HydroBond 109-LM Rubber Waterproofing Membrane – 20 Litre Tub

Brand: Newton Waterproofing Systems
Product Code: 109MV
In Stock

Newton HydroBond 109-LM is a flexible, single-component, cold-applied and seamless rubber waterproofing membrane used for the external waterproofing of earth-retaining structures such as basements and foundation walls. The membrane is extremely puncture resistant with elasticity of 850% and a 95% recovery memory.

£206.68 incl. VAT
£172.23 excl. VAT

Qty:

Liquid-Applied Rubber Waterproofing Membrane. Newton HydroBond 109-LM is a flexible, single-component, cold-applied and seamless rubber waterproofing membrane used primarily for the external waterproofing of earth-retaining structures such as basements and foundation walls.ย 

Newton HydroBond 109-LM is extremely puncture resistant with elasticity of 850% and a 95% recovery memory. The membrane becomes fully engaged into the substrate to prevent water tracking and is suitable for all below ground and earth-retained structures, ranging from domestic basements to the largest civil engineering projects.ย 

HydroBond 109-LM is also a constituent product of the Newton HydroBondยฎ System supported by BDA Agrรฉment Certificate BAB 16-031/04/A and is accepted by the NHBC as a suitable waterproofing system for Type A Waterproofing to Grades 1a, 1b, 2 & 3 โ€“ BS 8102:2022.ย 

Key Benefitsย 

  • Fully-bonded seamless membrane.ย 
  • Good elasticity with no shrinkage.
  • Primer not required for most substrates.ย 
  • Complete vapour barrier.ย 
  • Solvent free, non-toxic and odourless.ย 
  • Non-flammable โ€“ No VOCs.ย 
  • High radon gas resistance.ย 

Typical Applicationsย 

  • Waterproofing of retained structures, together with HydroBond 403 Plus.ย 
  • Standalone waterproofing membrane for basement, foundation and earth-retained walls.ย 
  • Used as a detailing membrane or where access is too tight to spray HydroBond 108-LM.ย 
  • Loading-capable, liquid DPM connecting wall waterproofing membrane to internal skin DPC.

Suitable Substrates:ย 

Correctly prepared substrates of:ย 

  • Concrete of at least 20 kNย 
  • Block and brick

Suitable Surfaces:ย 

  • Walls – Positive pressure
  • Soffits as a primer for Type C tapesย 
  • Horizontally at slab edge toe and other termination details at ground level
Features Result Units
Form Liquid
Colour Brown
Density / Specific gravity 1.03
Packaging – Bucket 20 litres
Shelf life 12 months
Pot life N/A
Application rate in 2 to coats – Detailing 3.2 Litres/m2
Application rate in 2 coats – Ground moisture – No water pressure -BS EN 15814 4.8 Litres/m2
Application rate in 2 coats – Waterproofing – BS EN 15814 6.4 Litres/m2
Application method Brush, roller & airless spray
Application temperature +5 to +40 ยบC
Service temperature -15 to +40 ยบC
Odour Slight resinous odour
VOC Does not contain solvents
pH 11 – 13
Curing*** 5ยบC 10ยบC 15ยบC 20ยบC 25ยบC Units
Ready for next coat**** 24/0.1 12/0.1 2/0.1 0.4 0.2 Hours
To not be adulterated by rain**** 24/0.1 12/0.1 1/0.1 0.5 0.5 Hours
Ready for temporary foot traffic / protection boards**** 24/4 12/3 2/2 1 1 Hours
Ready for flood / hosepipe test 48 24 4 3 2 Hours
Fully cured 48 25 8 5 3 Hours
Cured Performance Results Units Test Method
Colour Black
Membrane thickness – Detailing 2.0 mm
Membrane thickness – Ground Moisture – No water pressure 3.0 mm
Membrane thickness – Waterproofing 4.0 mm
Density / Specific gravity (no reinforcement) 1.1
Softening temperature > 130ยบC Ring & Ball
Adhesion to concrete 0.62 N/mm2 DIN 53232
Tensile strength & elongation at break (reinforced) 0.68 N/mmยฒ EN ISO 527-3:1995
Tensile strength & elongation at break (reinforced) (aged) 0.58 N/mmยฒ EN ISO 527-3:1995
Loading capability (no reinforcement) – Class 1 0.06 MN/mm2 EN 15815
Resistance to static indentation (reinforced) 250 N EOTA TR007:2004
Crack bridging ability (no reinforcement) – Class CB2 โ‰ฅ2 mm
Resistance to fatigue movement – 1000 actions @ -10ยบC Pass EOTA TR008:2004
Dimensional stability at high temperature – no dripping โ‰ฅ70 ยบC EN 15818
Low temperature flexibility @ -10ยบC Pass DIN 52123
Flexibility at low temperature @ 0ยบC Pass EN 15813
Water vapour diffusion resistance โ€“ Sd value 72.4 m BS EN 1931
Water vapour diffusion resistance – ยต value 36200 ยต Calculation from Sd value
Water vapour diffusion resistance 362 MNs/g Calculation from Sd value
Water tightness 7 bar ISO=DIS 7031
Water resistance – 21 days at 21ยบC Watertight EN 15817
Impact resistance after UV-ageing – 1000h – 10 mm Pass EN 12691:2001
Radon gas diffusion resistance (1 mm membrane) 2.1 x 10-11 m2/s K124/0295
Reaction to fire classification Euroclass B2 DIN 4102-1

Please see our our Delivery policy page for full details of our delivery terms and conditions, including information on exclusions, geographical restrictions, third parties, and failed deliveries.

1. Delivery Timescales

We will endeavour to deliver all orders within 1-3 working days (subject to geographical restrictions). Please note, where delivery lead-times for individual orders may be subject to change, we will keep you informed directly by phone or email within 24 hours of your order being placed.

Deliveries will not be made on UK bank holidays, and in such cases will fall on the next working day.

Standard delivery hours are between 8am and 6pm, Monday to Friday. If you are not available to accept the delivery when it is attempted, then a failed delivery charge will be applied (see the Delivery page for full details)

2. Delivery Fee Structure:

All orders, excluding those containing products covered in section 3 below, will be subject to the below delivery fee structure:

  1. Total order weight is between 0kg and 10kg = ยฃ7.99 standard delivery fee
  2. Total order weight is between 10kg and 20kg = ยฃ12.99 standard delivery fee
  3. Total order weight is between 20kg and 75kg = ยฃ20 standard delivery fee
  4. Total order weight is 75kg and above = ยฃ60 large order delivery fee
  5. Total order value exceeds ยฃ500 (regardless of weight) = Free delivery

3. Exclusions

The delivery fees detailed above apply to all orders, excluding:

  1. Orders containing insulation will be charged at ยฃ60 per pallet (10 units per pallet). Please get in touch with us directly for pricing and ordering.
  2. Orders containing protection boards: A large order delivery fee of ยฃ60 will be applied.
  3. Orders containing membranes of two metres wide and above: The delivery fee will be calculated as a price per unit*.
Code Description Weight (kg) Delivery Fee Per Unit
Multiple All membrane products with a width of two metres and above Varied ยฃ20
M3 Newton CDM 508 Mesh 29.26 ยฃ25
M2 Newton CDM 508 eco Floor 41.3 ยฃ30
M4 Newton CDM 520 eco Floor 37.62 ยฃ40

*Please note that, for orders containing membranes of two metres wide and above:

  1. Once the total order weight exceeds 75kg then the ยฃ60 large order fee will automatically be applied
  2. Once the total order value exceeds ยฃ500 then the free delivery policy will automatically be applied

4. Geographical Areas

The above delivery fees apply to all postcodes in mainland England, Wales and Scotland.

For deliveries to Ireland, Northern Ireland, the Channel Islands, the Scottish Isles, and any international orders please get in touch with the BaseTec team directly by email or phone for a custom delivery price. Standard delivery timescales do not apply to these areas and will be advised on request.

Additional charges, including customs fees, duties, or taxes may apply for international orders.

Reviews

There are no reviews yet.

Be the first to review “Newton HydroBond 109-LM Rubber Waterproofing Membrane – 20 Litre Tub”

You may also like…

Shopping Basket
INC VAT EX VAT