Tremco ES101 TREMBlock DPM GT – 25kg

Tremco ES101 TREMBlock DPM GT is a one coat solvent free, low viscosity, two component epoxy resin. With excellent bond strength, ES101 TREMBlock DPM GT fully cured, is a damp proof membrane which can accommodate hygrometer readings up to 98%. (theoretically 99.9%RH).

This product is supplies as a 25kg unit.

Product benefits:
– Cost effective single coat application reducing time on site
– Protects the final floorcovering from residual construction moisture and rising damp
– Can be applied where a structural damp proof membrane is not present or is ineffective
– Accommodates up to 98% RH (theoretically 99.9%RH)
– Increased coverage up to 38%, 25m2 – 33m2 (dependent on application thickness)
– Can be applied to Anhydrite/Calcium screed-based screeds (without Underfloor Heating where readings are up to 87% Relative humidity.)
– Solvent free (In-line with BREEAM Compliance) Eco Friendly
– Suitable for concrete and sand & cement screeds incorporating underfloor heating (surface temperature must not exceed 27°C in accordance with BS 8203 and BS 5325)

Useage/purpose:
Tremco ES101 TREMBlock DPM GT has been developed specifically to provide a guaranteed surface damp proof membrane with a single coat, where a structural damp proof membrane may not be present.

ES101 TREMBlock DPM GT can be used on unheated Anhydrite/Calcium Sulphate Screeds with a moisture content of 87%RH or less.

ES101 TREMBlock DPM GT is suitable for use on concrete and sand & cement screeds incorporating underfloor heating (surface temperature must not exceed 27°C in accordance with BS 8203 and BS 5325)

Packaging

ES101 is supplied in units of 10 kg (duo can) or 25 kg

Available colour:

When mixed: Black

Part A: Black

Part B: Clear amber liquid

Shelf life:

12 months when stored in its original, unopened containers

Protective Equipment:

Suitable protective clothing, gloves and safety goggles must be worn during mixing and application. For further information see our Material Safety Data Sheet.