Filoform FiloSeal+HD 225mm Duct Sealing System (Two units of FiloSeal+HD 125mm-160mm)

Filoform FiloSeal+HD 225mm duct sealing system is an engineered universal solution for sealing larger heavy cables and pipes in ducts, boreholes or transit frames of 225mm.

This product contains two units of the FiloSeal+HD 125mm-160mm Duct Sealing System. FiloSeal+HD is also available in a smaller pack size 0f 75-110mm.

Filoform FiloSeal+HD 225mm is suitable for sealing any cable configuration or pipes contained in one duct and also allows easy re-entry of the seal to add or remove cables or pipes as required.

The Filoform duct sealing system uses the Filoform MD+ sealant which is easily applied from a standard skeleton gun. The high quality, one component, flexible sealant is based on a silicone compound that air-cures. After application and full curing, the thixotropic MD+ forms a plastic elastomer mass with special qualities effectively sealing and bonding, while providing a high level of durability.

FiloSeal+HD is very easy to apply regardless of the type of cable scenario in the cable ducts as it uses strong, but flexible hexagonal tubes to support the cable and provide a strong backing for the seal. The unique design of the hexagonal tubes makes positioning and separation of the cables very simple while also providing a strong backing for the MD+ to be applied on.

Features: 

• Flexible, one component, adhesive and sealing compound in a cartridge – (310ml)
• Kits are complete with backing and mastic to fill an empty duct of the quoted kit size
• High levels of gas and water tightness
• Excellent adhesion, applicable to all common building materials
• Shows fire resistance properties (for full fire resistance see FiloSeal+HD Fire)
• Resistant against water, alkaline, chemical agents
• Resistant to termites (Mastotermes Darwiniensis) Northern Australian termites
• Resistant to rats – Resistant to Hydrogen Sulphide / Methane and many other gases (NedLab)
• Non-corrosive
• Solvent-free
• Shock absorbing
• Non-toxic, neutral and almost odourless
• Also suitable for limiting the EX-zones during transitions (observe chemical resistance)
• Complies with 2011 NEC Articles 225.27, 230.8, 300.5(G), 300.7 (A) on Raceway Seals, and 501.15 (B)(2)
• Suitable for any shaped duct/borehole/opening
• WIMES Compliant (3.02 2013 6.4.3.2 b)
• Quick and easy installation
• A complete kit
• Seals all know materials, PVC & PE sheathed cables, PILC, (HD) PE pipes
• Engineering duct sealing solution
• Suitable for renovations, can be installed retrospectively