Ardex R 3 E Moisture Tolerant Epoxy Primer – 25kg

ARDEX R 3 E Solvent Free Epoxy Primer and Bonding Agent is a two component, solvent free, epoxy resin for use on sound concrete, cementitious surfaces, calcium sulphate based screeds and smoothing compounds.

Features:

• Two Component Epoxy Resin Primer and Bonding Agent
• Low odour
• Suitable for use on damp cementitious floors
• Can be used on dry Calcium Sulphate Screeds
• Use with a sand keyed finish on to ARDEX DPM’s where an application greater than 6mm of ARDEX Smoothing Compound is required, or a bonded ARDEX Screed greater than 50mm
• Can be used as a primer or bonding agent when installing an ARDEX Screed
• Use with the ARDEX K80/ARDEX SDT-B Industrial Flooring System

Uses:

ARDEX R 3 E forms a primer/bonding layer on most dry substrates, especially smooth or dense surfaces in internal and external situations.

ARDEX R 3 E can be used as a primer and bonding bridge, prior to the application of the ARDEX range of Cement-Based Tiling and Flooring products, and on cementitious and Calcium Sulphate based screeds.

ARDEX R 3 E must be sand blinded to refusal, with dry ARDEX FINE AGGREGATE to give a mechanical key for use as a primer prior to application of ARDEX K 71 Rapid Drying Industrial Topping and Wearing Surface, or other appropriate ARDEX Cement Based products and Smoothing Compounds.

Coverage:

Approximately 100m² per 25kg unit.

Packaging:

25kg units of ARDEX R 3 E Solvent Free Epoxy Primer are supplied in pre-gauged metal duo containers. The hardener (Component B) is in the small container and the resin (Component A) is in the large container with sufficient space to add the hardener (Component B).