Ardex WPM 200 Liquid Waterproof Membrane – 20ltr Grey

ARDEX WPM 200 is a solvent free, low viscosity, two component, polymer modified epoxy liquid waterproof membrane. ARDEX WPM 200 is suitable for Type A waterproof barrier protection structures as per BS 8102.

After hardening ARDEX WPM 200 produces a membrane with high inherent strength and excellent bond to appropriate substrates, including very damp concrete and screeds.

Features:

• Ideal for under raised access floors, in plant rooms and wet areas
• Provides a water and water vapour barrier
• Suitable for BS 8102 Type A waterproof barriers
• Chemically resistant
• Excellent adhesion, can be applied to a wide variety of substrates including concrete, masonry and steel
• Can be sand blinded to act as a multipurpose primer
• For use on vertical and horizontal applications
• FeRFA Class 2 resin floor coating that, with a sand scatter, gives a reduced slip wearing surface

Uses:

ARDEX WPM 200 has been specifically developed to provide a water and water vapour barrier, or priming layer to concrete, screeded, rendered or masonry surfaces, steel and other vertical as well as horizontal hard surfaces.

ARDEX WPM 200 is ideal for use in plant rooms, under raised access floors, ground floor slabs, workshops, marine protection, sewage processing areas, swimming pool surrounds and shower areas.

It can be used as a FeRFA Class 2 resin floor finish or sand scatter finished as a reduced slip wearing surface. A sand scattered prepared layer of WPM 200 can also be used as a waterproof key for tiling or rendering.

Coverage:

Approximately 4.8m²/ltr (4m²/kg) e.g. when mixed a 20 litre unit will cover approximately 92m² per coat at 200 microns.

Packaging:

Units of ARDEX WPM 200 are supplied in pre-gauged metal duo containers. The hardener (Component B) is in the small container and the resin (Component A) is in the large container with sufficient space to add the hardener (Component B).