Newton HydroCoat 103 2K is a high performance cementitious waterproof coating with high adhesion that can be applied very quickly by airless spray. For reservoirs, water tanks, below ground structures, podium decks, balconies and parking areas.
Capable of resisting extremely high positive and negative water pressure, HydroCoat 103 2K forms a hard, highly alkaline coating with a degree of elasticity which has greatly enhanced chemical resistance and so is particularly suited for the protection of concrete within sulphate contaminated ground.
It has excellent resistance to the ingress of acid gases, moisture and chlorides to enhance the durability of reinforced concrete and protect highway and coastal structures from chloride attack. HydroCoat 103 2K is reinforced over static joints and at details and changes of direction with HydroCoat 912-RT.
Key Benefits:
- Very waterproof – Resistant to 10 bar positive and negative pressure.
- Quick application in one coat to horizontal surfaces.
- Non-toxic when cured.
- Sprayable – Up to 2 m2 per minute is possible.
- Hard, durable and UV-stable trafficable finish.
- All year round application to damp substrate.
- Can be applied at temperatures as low as 5°C.
- Very low VOC content.
- Very high diffusion resistance to carbon dioxide gas and chloride ions; equivalent to 100 mm of concrete cover.
- Excellent adhesion to sound prepared concrete substrates and steel.
- Thixotropic – can be applied at 1 mm to vertical surfaces.
- High build coating of 2 mm eliminates the incidence of small defects seen within thinner membranes.
Typical Waterproofing Applications:
- Podium decks, balconies and car parking areas.
- Concrete water-retaining structures such as water tanks and reservoirs.
- Concrete earth-retaining foundation walls to both the positive and negative side.
- Internal concrete surfaces of walls and rafts or slabs to earth-retained structures such as habitable basements, car parks, plant rooms and lift-pits.
- Concrete temporary lay down and working areas.
| Features |
Result |
Units |
| Form |
Part A liquid + Part B powder |
|
| Colour |
Grey |
|
| Mixed density |
1.950 |
|
| Pack size |
30 |
kg |
| Yield per pack |
15.4 |
Litres |
| Shelf life |
12 |
Months |
| Pot life @ 20ºC & RH of 40% |
30 |
Minutes |
| Application rate – in one or two coats |
3.9 |
kg/m2 |
| Application temperature |
+5 to +35 |
ºC |
| Service temperature |
-15 to +180 |
ºC |
| Odour |
Low – Characterised as polymeric |
|
| VOC content |
0 |
% |
| Curing* |
5ºC |
10ºC |
15ºC |
20ºC |
25ºC |
Units |
| Ready for next coat |
80 |
60 |
50 |
40 |
33 |
Minutes |
| To not be adulterated by rain |
3 |
2.5 |
2 |
1.5 |
1.5 |
Hours |
| Ready for temporary traffic/protection boards |
24 |
24 |
22 |
20 |
18 |
Hours |
| Ready for flood/hosepipe test |
8 |
7 |
6 |
5 |
4 |
Days |
| Fully cured |
28 |
28 |
28 |
28 |
28 |
Days |
| Cured Performance |
Result |
Units |
Test Method |
| Colour |
Grey |
|
|
| Membrane thickness in one or two coats |
2.0 |
mm |
|
| Adhesion to concrete |
2.07 |
MPa |
BS EN 1542 |
| Tensile strength |
2.66 |
MPa |
BS 6319-7:1994 |
| Static crack bridging capability (Class A2) |
0.4 |
mm |
BS EN 1062-7 – Method A |
| Dynamic crack bridging capability |
Not classified |
|
BS EN 1062-7 – Method B |
| Compressive strength – 1 day |
>10 |
MPa |
BS 4551 |
| Compressive strength – 7 days |
>30 |
MPa |
BS 4551 |
| Compressive strength – 28 days |
>40 |
MPa |
EN 12190 & BS 4551 |
| Hardness (28 days) |
>75 |
Shore D |
BS EN ISO 868:2003 |
| Water vapour resistance – SD value |
0.91 |
m |
BS EN ISO 7783-2 |
| Water vapour resistance – µ value |
455 |
µ |
Calculation from SD value |
| Water vapour resistance |
4.55 |
MNs/g |
Calculation from SD value |
| Water resistance – Positive & Negative |
10 |
Bar |
DIN 1048 |
| Liquid Water Transmission Rate (Capillary Absorption and Permeability to Liquid water) |
w = 0.018 kg.m-².h-⁰.⁵ |
|
EN1062-3 |
| Chloride Ion Diffusion Resistance |
No steady state of flux reached after 31 years on test |
|
Vinci Technology |
| Permeability to CO² |
50*** |
m |
EN 1062-6 |
| Thermal compatibility |
3.5 |
MPa |
EN 13687-1 |
| Coefficient of Thermal Expansion |
16.6 x 10-⁶K-¹ |
|
EN1770 |
| Reaction to fire classification |
A2-s1, d0 |
Euroclass |
BS EN 13501-1 |
| Wear Resistance |
Exceeds BCA AR0,5: Highest classification of wear resistance. |
|
EN13813 |
| UV Resistance – Stable but will discolour |
50 |
Years |
UNI EN ISO 11507:2007** |
| pH |
12-14 |
|
|
The above data, even if carried out according to regulated tests are indicative and they may change when specific site conditions vary.
*Figures are influenced by humidity also and so are indicative. **UNI EN ISO 11507:2007 is an accelerated ageing test. The result of 1000 hours translates to 50 years.
***2mm equivalent to 100mm of concrete.
Please see our Delivery policy page for full details of our delivery terms and conditions, including information on exclusions, geographical restrictions, third parties, and failed deliveries.
Delivery Timescales
We will endeavour to deliver all orders within 1-3 working days (subject to geographical restrictions). Please note, where delivery lead-times for individual orders may be subject to change, we will keep you informed directly by phone or email within 24 hours of your order being placed.
Deliveries will not be made on UK bank holidays, and in such cases will fall on the next working day.
Standard delivery hours are between 8am and 6pm, Monday to Friday. If you are not available to accept the delivery when it is attempted, then a failed delivery charge will be applied (see the Delivery page for full details).
Delivery Communications
We aim to dispatch and deliver all our products within their specified time frames. You will get notified by BaseTec via email when your products have been dispatched. This will include details of your order and the expected delivery time. BaseTec will contact you via email or phone if there are any delays in picking your order or after dispatch.
If any products are out of stock or unavailable at the time of ordering, the BaseTec team will contact you by phone or email to discuss your options.
Reviews
There are no reviews yet.