Tremco SP050 Fix & Seal MS Polymer Grey – 310ml (12 per case)

Tremco SP050 Fix & Seal MS Polymer Grey is a high strength adhesive provding a flexible bond in a wide variety of construction and industrial applications.

This product is supplied as a 310ml tube with 12 per case (white)

Typical uses include the bonding of skirting boards, signage, battens, slats, door thresholds, acoustic panels (and similar sheet materials), etc.

Product benefits:
– A more environmentally friendly alternative to traditional polyurethane adhesives – does not contain solvents or isocyanates and is very low odour
– Excellent adhesion to a wide range of materials including metals, glass, PVC and concrete
– Tack free in less than 30 minutes
– Excellent weather resistance – suitable for internal and external applications such as signage
– Can be over painted once cured

Necessary tools: Standard cartridge skeleton gun and a sharp knife to cut nozzle.

Protective Equipment
Use in well ventilated conditions and ensure all recommended 
protective equipment is worn during handling & use of this product. For full recommendation, refer to safety data sheet.

Preparation
•  May be applied to damp substrates. 
•  For optimum adhesion, surfaces should be clean, dry, 
sound and free of contamination.
•  Always carry out a test to confirm compatibility prior to 
use.
•  Roughen non-porous surfaces.
•  On materials such as glass, aluminium, ceramics, 
lacquered wood, epoxy and polyester no primer is 
required. For other materials, please contact tremco illbruck 
Technical Services.

Cleaning
Remove excess adhesive immediately with AT200 High Strength Cleaner. Ensure surface is solvent resistant before cleaning. Cured adhesive can only be removed mechanically.

Please note

Tremco SP050 Fix & Seal MS Polymer Grey is not suitable for bonding polyethylene, polypropylene, Teflon® or nylon. Not recommended for sheet laminate. Not recommended for use on synthetic materials sensitive to stress cracking. Not suitable for constantly submerged joints. Do not use as a structural glazing 
adhesive. When bonding to copper or brass, please consult tremco illbruck technical services for priming details.