VANDEX FLEXTAPE ADHESIVE G is a Thixotropic Epoxy Resin Adhesive, consisting of VANDEX FLEXTAPE ADHESIVE G RESIN and VANDEX FLEXTAPE ADHESIVE G HARDENER.
Uses:
- VANDEX FLEXTAPE ADHESIVE G can be used as a general purpose adhesive, as well as for applying
- VANDEX FLEXTAPE E over construction and movement joints (even where movement is significant) on mineral surfaces.
- VANDEX FLEXTAPE ADHESIVE G is chemically inert and stable, and can be used in various water containing situations. For foul sewage and waste water contact zones, please contact your local Vandex representative for specific evaluation.
Product Benefits:
- Two-component system
- Adhesive for VANDEX FLEXTAPE and VANDEX FLEXTAPE E
- Solvent free
- Excellent mechanical properties
- Can be applied on horizontal, vertical and overhead substrates
- Can be Applied on fresh concrete
Areas of Application:
VANDEX FLEXTAPE ADHESIVE G can be used as a general-purpose adhesive, as well as for applying VANDEX FLEXTAPE E over construction and movement joints (even where movement is significant) on mineral surfaces.
VANDEX FLEXTAPE ADHESIVE G is chemically inert and stable, and can be used in various water containing situations. For foul sewage and wastewater contact zones, please contact your local Vandex representative for specific evaluation.
Properties:
When fully cured, VANDEX FLEXTAPE ADHESIVE G is a rigid adhesive. Its pasty consistency ensures good workabiliy even to uneven and overhead surfaces
Application:
VANDEX FLEXTAPE ADHESIVE G is applied manually by trowel or toothed comb to both contact surfaces of the substrate to be covered with VANDEX FLEXTAPE E (5 cm on either side of the crack or joint), pressing vigorously to ensure a good bond. Depending on roughness of the surface, layer thickness of VANDEX FLEXTAPE ADHESIVE G is approx. 1–2 mm. – When the adhesive and VANDEX
FLEXTAPE E are applied the latter must immediately be pressed into the adhesive to ensure a good bond, and then coated with a further layer of VANDEX FLEXTAPE ADHESIVE G on top.
Consumption:
Tape width 200 mm: 0.8–1.1 kg per m of tape
Tape width 150 mm: 0.5–0.8 kg per m of tape
| Technical Data |
|
| Properties of single components |
FLEXTAPE ADHESIVE G RESIN |
FLEXTAPE ADHESIVE G HARDENER |
| Consistency |
Thick paste |
Thick paste |
| Colour |
Grey |
White |
| Density at 23 °C / 50% rel. hum. [kg/l] |
Approx 1.55 |
Approx 1.5 |
| Application properties |
FLEXTAPE ADHESIVE G RESIN |
|
| Consistency |
Thixotropic paste |
|
| Colour |
Grey |
|
| Density |
Approx 1.5 |
|
| Pot life (at 50% rel. hum.) [min.] |
approx. 20 (at +30 °C)
approx. 40 (at +20 °C)
approx. 90 (at +10 °C) |
|
| Application temperature [°C] |
+5 up to +30 |
|
| Final properties |
FLEXTAPE ADHESIVE G RESIN |
|
| Bonding strength to concrete [N/mm²] |
>3 |
|
| Bonding strength to steel [N/mm²] |
18-24 |
|
| Modulus of elasticity [N/mm²] |
4’000 |
|
| Compressive strength [N/mm²] |
60-70 |
|
All data is averaged from several tests under laboratory conditions. In practice, climatic variations such as temperature, humidity, and porosity of substrate may affect these values.
Please see our our Delivery policy page for full details of our delivery terms and conditions, including information on exclusions, geographical restrictions, third parties, and failed deliveries.
1. Delivery Timescales
We will endeavour to deliver all orders within 1-3 working days (subject to geographical restrictions). Please note, where delivery lead-times for individual orders may be subject to change, we will keep you informed directly by phone or email within 24 hours of your order being placed.
Deliveries will not be made on UK bank holidays, and in such cases will fall on the next working day.
Standard delivery hours are between 8am and 6pm, Monday to Friday. If you are not available to accept the delivery when it is attempted, then a failed delivery charge will be applied (see the Delivery page for full details)
2. Delivery Fee Structure:
All orders, excluding those containing products covered in section 3 below, will be subject to the below delivery fee structure:
- Total order weight is between 0kg and 10kg = £7.99 standard delivery fee
- Total order weight is between 10kg and 20kg = £12.99 standard delivery fee
- Total order weight is between 20kg and 75kg = £20 standard delivery fee
- Total order weight is 75kg and above = £60 large order delivery fee
- Total order value exceeds £500 (regardless of weight) = Free delivery
3. Exclusions
The delivery fees detailed above apply to all orders, excluding:
- Orders containing insulation will be charged at £65 per pallet (10 units per pallet). Please get in touch with us directly for pricing and ordering.
- Orders containing protection boards: A large order delivery fee of £60 will be applied.
- Orders containing membranes of two metres wide and above: The delivery fee will be calculated as a price per unit*.
| Code |
Description |
Weight (kg) |
Delivery Fee Per Unit |
| Multiple |
All membrane products with a width of two metres and above |
Varied |
£20 |
| M3 |
Newton CDM 508 Mesh |
29.26 |
£25 |
| M4 |
Newton CDM 520 eco Floor |
37.62 |
£40 |
*Please note that, for orders containing membranes of two metres wide and above:
- Once the total order weight exceeds 75kg then the £60 large order fee will automatically be applied
- Once the total order value exceeds £500 then the free delivery policy will automatically be applied
4. Geographical Areas
The above delivery fees apply to all postcodes in mainland England, Wales and Scotland.
For deliveries to Ireland, Northern Ireland, the Channel Islands, the Scottish Isles, and any international orders please get in touch with the BaseTec team directly by email or phone for a custom delivery price. Standard delivery timescales do not apply to these areas and will be advised on request.
Additional charges, including customs fees, duties, or taxes may apply for international orders.
Fast Delivery 
Expert Support
Low Trade Prices
Quality Products
In Stock
Reviews
There are no reviews yet.