VANDEX PLUG is a cementitious, ready-mixed, rapid setting compound to stop water and moisture ingress.
Features and Benefits:
- stops flowing water
- sets in seconds
- durable
Areas of Application:
VANDEX PLUG can be used internally or externally as a waterproof plugging mortar or where rapid setting and early strength gain is required:
- Plugging water leaks and seepage
- Sealing leaking cracks
- Sealing wet surfaces
- Plugging leaks in earthenware pipes
- Caulking tunnel segment joints
- Fixings in water structures where immediate use is required
- Installation of steel elements in concrete or masonry (e.g. rail stanchions)
- Erosion resistant mortar for elements affected by rain
- Erosion resistant shoring of canal sealing
- Underwater work (access permitting)
VANDEX PLUG can be used on the following substrates:
- concrete
- masonry
- earthenware
- stone
Properties:
VANDEX PLUG has the following physical properties:
- Stops water flow
- Sets in approx. 30 seconds after mixing
- Durable
- Can be used underwater
- Can be mixed with water or used dry
- Easy application
- Packaged in easy to use, resealable containers
Application:
To avoid wastage, only small quantities of VANDEX PLUG should be mixed.
- After mixing, apply the VANDEX PLUG to the appropriate area immediately. Work the mixture well into the area and then hold firmly in place for about 30 seconds. (Wear rubber gloves).
- Maintain pressure without disturbing the material, until it has set.
- Remove excess material.
- After lightly pre-wetting apply a normal VANDEX waterproofing coating.
In certain circumstances VANDEX PLUG may be applied as a dry powder. Place and hold the powder directly over the leak for 30–40 seconds.
Consumption:
Depending on the size of the water leak: approx. 0.3 kg/water leak.
Packaging:
15 kg plastic, resealable buckets
Storage:
When stored in a dry place in unopened, undamaged original packaging, shelf life is 12 months.
View our full range of Vandex products here.




Reviews
There are no reviews yet.