Denso™ Flashing Tape 450mm x 10m – Self-Adhesive (1 Unit)

Denso™ Flashing Tape 450mm x 10m is a cold-applied, self-adhesive aluminium-backed flashing in tape form. It uses aluminium foil coated with a bituminous adhesive and a plastic interleaving for cleaner handling and easier release. Also, the aluminium/polyester laminate has a grey weatherproof lacquer finish that resembles lead.

The tape uses a high-melting-point polymer bitumen adhesive laminated to an aluminium/polyester laminate with a grey weatherproof lacquer finish. In addition, a release-coated plastic film protects the adhesive surface, and installers discard it during use.

Denso recommends using the tape with Denso Flashing Tape Primer.

For more information, also visit the Denso website.

---

Denso™ Flashing Tape 450mm Technical Information

Composition

Denso Flashing Tape uses a high-melting-point polymer bitumen adhesive laminated to an aluminium/polyester laminate with a grey weatherproof lacquer finish. In addition, a release-coated plastic film protects the adhesive surface, and installers discard it during use.

---

Uses

Denso Flashing Tape supports waterproofing for roof-to-wall and other building joints.

Service Temperature: +80°C maximum short term

---

Characteristics

Denso Flashing Tape has the following characteristics:

• resistant to water, water vapour and gases,
• conformable over a wide temperature range, and
• adherent to metal, concrete, brick, slate, tile,
• painted wood, glass and rigid plastics.

---

Application

Because site conditions can vary, see Instructions for Use for additional detail.
Recommended primer: Denso Flashing Tape Primer
Application Temperature: +5°C to +40°C

---

Application Limitations

The tape suits smooth surfaces only. It is not suitable for grooved decking because the tape must stay in full contact with the application surface across its complete width, with no gaps or voids.

---

Availability

Denso Flashing Tape comes in 10 metre rolls.

---

Storage conditions

Store in a cool and dry place in the original packaging.

---

Waste material

Please avoid or minimise waste wherever possible. Also, do not discard waste material, including packaging, in the surrounding environment. Follow all relevant legislation for disposal.

---

Note: Overpainting the flashing requires a good quality water-based exterior paint. In addition, the use of other sealants in conjunction with the flashing tape is not necessary. Silicone-based sealants and solvent-based paints are not normally suitable for use in contact with the adhesive compound.