NATCEM AC – 25kg

Fast-Setting Mortar with Minimum 3mm Thickness. NATCEM AC is an environmentally friendly, fast setting mortar with a fine graded aggregate, suitable for installation up to any thickness from a minimum of 3mm.

The product is suitable for a wide range of applications and can be applied by Trowel, Brush, Roller or Pumped.

NATCEM AC contains no chemical additives and only requires the addition of water. The product does not require steel primers, bonding agents or curing agents. It can be used in cold, wet or underwater conditions and can be installed at any depth from a minimum of 3mm. It is also DWI Reg.31 approved for contact with potable water with only a 30-minute curing period required after set.

Applications:

• Concrete Repairs
• Grouting / Void filling
• Direct contact with potable drinking water
• Underwater 
• Coastal Environments
• Pointing 
• Rivers and Canals 
• Environmentally sensitive areas 
• Conservation of historic buildings 
• Anti-Carbonation Coating 
• Infill Surface Imperfection 
• Fine mouldings

Benefits:

• Fast-setting with rapid strength gain 
• No curing period required 
• Excellent adhesion 
• Only requires the addition of water 
• Waterproof 
• Low shrinkage 
• DWI Reg.31 Approved 
• Corrosion Resistant 
• Sulphate resistant 
• Resistant to chloride penetration 
• High chemical resistance 
• Sets underwater 
• Can be used in freezing temperatures 
• Environmentally friendly & low carbon footprint
• Contains no chemical additives 
• No shelf life