Tradecc PC 509 Z Acryl is a 4-component, elastic, acrylic injection resin with low viscosity for the water sealing of cracks and voids in walls, floors, concrete constructions and underground structures.
Applications:
- Water sealing of cracks and voids in walls, floors, concrete constructions, underground structures
- Can be used in constructions that are not permanently in contact with water (fluctuating ground water level)
- Injection of very fine cracks
Properties:
- Reacts into an elastic, durable gel
- Good general chemical resistance
- Does not contain acrylamide, methacrylamide, formaldehyde or solvents
- Non-flammable
- Excellent adhesion on mineral building materials such as concrete, cement and brick
- Suitable for absorbing shrinkage and expansion of injected cracks and voids caused by temperature fluctuations
- The reaction speed can be adjusted from a few seconds to several minutes
- High water retention capacity: when the injected cracks dry out due to temperature or ground water level fluctuations, the gel will not crack easily
- The cured gel has excellent durability in wet-dry cycles
| MIXING RATIO |
|
SOLUTION 1 |
SOLUTION 2 |
| 1:1 by volume |
PC® 509 Z Acryl Resin with
PC® 509 Acryl Catalyst |
PC® 509 Acryl Initiator with water |
| TECHNICAL DATA (Typical Values) |
|
RESIN |
CATALYST |
INITIATOR |
| Colour |
Purple-pink liquid |
Clear yellow liquid |
White powder |
| Viscosity (20 °C) |
19 mPas |
7 mPas |
|
| Density (20 °C) |
1.15 g/cm3 |
1.04 g/cm3 |
|
| pH |
6.5 – 8 |
|
|
| % Active parts |
42 % – 48 % |
|
|
| Compatible with water |
Yes |
Yes |
Soluble |
| Packaging |
25 kg |
2.5 kg |
2 x 0.625 kg |
|
Standard |
Value |
| Minimum application temperature |
|
5°C |
| Elongation at break |
|
> 50% |
| Watertightness under pressure |
EN 14068 |
Waterproof at 2 x 10⁵ Pa |
| Compatibility with concrete |
EN 12637-1 |
Pass (compatible) |
| Sensitive for wet-dry cycles |
EN 14498 B |
No change in swelling capacity after 10 wet-dry cycles * |
| Swelling capacity under water |
EN 14498 A |
The swelling capacity reaches a constant level |
| Increase of volume by conservation under water |
EN 14498 |
150 % after 7 days of immersion in water at 21 °C |
*A wet-dry cycle consists of 1 day of drying at 50 ° C, followed by 6 days of immersion in water at a temperature of 21 ° C
| REACTION TIMES AT 20 °C |
| SOLUTION 1 |
SOLUTION 2 |
|
| Resin |
Catalyst |
Initiator |
Water* |
|
| Kg |
Litre |
Kg |
Litre |
Kg |
Kg |
Litre |
Reaction time at 20 °C |
| 25 |
21.74 |
2.50 |
2.40 |
1.25 |
24.14 |
24.14 |
24 sec |
| 25 |
21.74 |
2.50 |
2.40 |
1.00 |
24.14 |
24.14 |
31 sec |
| 25 |
21.74 |
2.50 |
2.40 |
0.75 |
24.14 |
24.14 |
40 sec |
| 25 |
21.74 |
2.50 |
2.40 |
0.625 |
24.14 |
24.14 |
44 sec** |
| 25 |
21.74 |
2.50 |
2.40 |
0.50 |
24.14 |
24.14 |
56 sec |
| 25 |
21.74 |
2.50 |
2.40 |
0.25 |
24.14 |
24.14 |
1 min 12 sec |
*This is an approximate value as the volume of the initiator has not been taken into account.
**Standard composition.
Please see our Delivery policy page for full details of our delivery terms and conditions, including information on exclusions, geographical restrictions, third parties, and failed deliveries.
Delivery Timescales
We will endeavour to deliver all orders within 1-3 working days (subject to geographical restrictions). Please note, where delivery lead-times for individual orders may be subject to change, we will keep you informed directly by phone or email within 24 hours of your order being placed.
Deliveries will not be made on UK bank holidays, and in such cases will fall on the next working day.
Standard delivery hours are between 8am and 6pm, Monday to Friday. If you are not available to accept the delivery when it is attempted, then a failed delivery charge will be applied (see the Delivery page for full details).
Delivery Communications
We aim to dispatch and deliver all our products within their specified time frames. You will get notified by BaseTec via email when your products have been dispatched. This will include details of your order and the expected delivery time. BaseTec will contact you via email or phone if there are any delays in picking your order or after dispatch.
If any products are out of stock or unavailable at the time of ordering, the BaseTec team will contact you by phone or email to discuss your options.
Fast Delivery 
Expert Support
Low Trade Prices
Quality Products
In Stock
Reviews
There are no reviews yet.