Newton DampSafe 603 Tile D-Mat Decoupling Membrane – 1m x 30m

3mm decoupling mat for tiling floors. Newton DampSafe 603 Tile D-Mat is a 3mm decoupling mat that isolates the tiled floor surface from cracking or movement in the substrate and relieves compressive stress acting on specific points on the floor. 

The dimpled membrane also ventilates the substrate below to equalise vapour pressure. The fleece surfaces quickly absorb adhesives to provide an exceptional bond to both the substrate below and the tiled floor above. The material is also elastic and highly impervious to the diffusion of water vapour. 

Key Benefits: 

• Accommodates movement and prevents the transfer of stresses from the substrate to the tiled surface 
• Low thermal conductivity of 0.0369 W/mK (Watts per metre-Kelvin)
• Adds only 3mm to the floor finishes 
• Effective air and vapour barrier if joints are sealed 
• Lightweight and easy to install 
• Load-bearing, tough and durable

Typical Applications:

• Decoupling of the tiled floor from the substrate below 
• Tiled or paved floors 
• Floor builds that include underfloor heating systems 

Suitable Substrates: 

• -Solid floors of concrete or screed 
• -Ventilated timber floors 

Substrates for Newton 603 Tile must be structurally sound, dry, level, clean, suitable for problem-free tile installation and in conformance with all applicable standards. Screed substrates must have dried to a moisture content of < 2 % (CM test) in accordance with DIN 18365.

When installing over absorbent substrates, observe all relevant instructions of the adhesive manufacturer. 

If substrate levelling is required, complete before beginning installation of the uncoupling bed, also observing all processing instructions of the levelling compound manufacturer.

Packaging: 

• Roll size: 30 m x 1 m (30 m²) 
• Pallet: 8 rolls (240 m²)